Phenol degradation in water through a heterogeneous photo-Fenton process catalyzed by Fe-treated laponite
Articolo
Data di Pubblicazione:
2009
Abstract:
New photo-Fenton catalysts have been prepared from synthetic layered clay laponite (laponite RD). Two series of Fe-laponite catalysts were synthesised, with or without thermal treatment of the mixture Fe polycations-laponite in the intercalation procedure. In each series, the intercalated solids underwent calcination at four temperatures, 250, 350, 450, and 550 °C. The catalysts were used for photo-assisted Fenton conversion of phenol, analyzing the influence of five operating factors: the wavelength of the light source (254 nm UV-C and 360 UV-A radiation), the amount of the catalyst (between 0 and 2 g/L), the initial phenol concentration (between 0.5 and 1.5 mmol/L), the initial concentration of hydrogen peroxide (between 20 and 100 mmol/L), and the initial pH of the solution (between 2.5 and 3.5). In all experiments, the temperature was kept constant at 30 °C. The results have shown that the almost complete conversion of phenol was possible, after only 5 min, under the following operating conditions: UV-C radiation; a pH of the aqueous solution of 3; a dose of 1 gcatalyst/L, and a hydrogen peroxide concentration of 50 mmol/L for a solution containing 1 mmol/L of phenol. The catalyst prepared under thermal treatment and calcined at 350 °C showed the best catalytic performance. A kinetic model was proposed for the process, testing its validity and estimating the rate constants.
Tipologia CRIS:
03A-Articolo su Rivista
Elenco autori:
B. Iurascu; I. Siminiceanu; D. Vione; M. A. Vicente; A. Gil
Link alla scheda completa:
Pubblicato in: