Improving corn silage quality in the top layer of farm bunker silos through the use of a next-generation barrier film with high impermeability to oxygen.
Articolo
Data di Pubblicazione:
2014
Abstract:
This study examined the effect on the fermentation,
chemical, and microbiological quality of corn silage
covered with a new-generation high oxygen barrier film
(HOB) made with a special grade of ethylene-vinyl alcohol (EVOH) compared with a standard polyethylene
film (PE). Two bunkers (farms 1 and 2) were divided
into 2 parts lengthwise so that half of the silo would
be covered with PE film and the other with HOB film.
Plastic net bags with fresh chopped corn were buried in
the upper layer (close to and far from the wall) and in
the central part of the bunkers. During spring-summer
consumption, the bags were unloaded, weighed, and
subsampled to analyze the dry matter (DM) content,
neutral detergent fiber and starch contents, pH, lactic
and monocarboxylic acids, yeast and mold counts,
aerobic and anaerobic spore-former counts, and aerobic stability. We also determined the economic benefit of applying the novel covering. The top layer of silage conserved under the HOB film had a higher lactic acid content and lower pH; lower counts of yeasts, molds, and aerobic and anaerobic spore-formers; higher aerobic stability; and lower DM losses than the silage conserved under the PE film. The use of the HOB film prevented almost all of the silage in the upper layer from spoiling; only 2 out of 32 samples had a mold count >6 log10 cfu/g. This led to a net economic gain when the HOB film was used on both farms due to the increased DM recovery and reduced labor time required to clean the upper layer, even though the HOB film cost about 2.3 times more than the PE film. Furthermore, use of the HOB film, which ensures a longer shelf life of silage during consumption, reduced the detrimental effect of
yeasts, molds, and aerobic and anaerobic spore-formers on the nutritional and microbiological quality of the unloaded silage.
Tipologia CRIS:
03A-Articolo su Rivista
Elenco autori:
Borreani G.; Tabacco E.
Link alla scheda completa:
Pubblicato in: